Pipes

EQMAR cooperates with a number of domestic and overseas companies – PIPE MANUFACTURERS.

Our specialization is seamless pipes of huge diameters for high temperatures and high pressure conditions.

• Pipes for acid media operation
• Seamless pipes with a high resistance for deformation
• Pipes made of cold-resistant steels
• Piping for oil and gas exploitation and production
• Reducing pipes
• Steel T-joints
• Elbow bends
• Cracking pipes: DN 4 – 550mm.Wall thickness 0,5 – 30mm;
• Seamless stainless pipes: DN 0,6-820mm;
• Electric welded stainless pipes: DN 6 – 3000mm. Steels AISI 304, AISI 304L,AISI 321, AISI 316, AISI 316Ti, AISI 316L, AISI 314, DIN 17456;
• Seamless pipes made of carbon and alloyed steels: DN 20 – 1500mm, wall thickness – 0,5 – 270mm;
• Boiler pipes: DN 4 – 219mm. Wall thickness 2 – 40mm;
• Huge DN pipes from barrel shells: DN720-3020mm. Tube length is double barrel shell length 1500 or 2000mm. Wall thickness 12-28mm;
• Pipes for building and circular cross-section machine building;
• outer DN from 21.3 till 711mm (from1/2 till 28 inches); square section: from 40х40mm till 400х400mm; rectangular cross-section: from 50х30mm till 500х300mm. Pipes of square and rectangular cross-section may be supplied with a wall thickness up to 20mm. Steel (for building): usually S 355 J2H as per EN 10210-1, other steels as per Customer’s requirement as well.
• Electric welded longitudinal pipes for technological pipes made of carbon, low-alloyed, high-alloyed, corrosion resistant, heat-resistant steels: DN 350-1620mm. Wall thickness 4-30mm.